同時在葉片整體性能上，也進行了檢驗，如表3所示。表中數據表明，碳纖維替代玻璃纖維，主梁利用彎扭耦合進行設計，在鋪層平均厚度減小11.33%的情況下，葉片在結構性能上仍有全面的提高。

 
3 小結
    彎扭耦合運用到葉片設計將是大勢所趨，其技術將會逐漸成熟。本文主要對彎扭耦合設計在葉片主梁上的運用做了初步探討對彎扭耦合控制參數進行了研究，推導出了單向?qū)雍习遄詈?jiǎn)潔的耦合控制參數的表達式，并從理論上對彎扭耦合控制參數的變化范圍進行了計算。計算表明，在一定鋪層角度范圍內，彎扭耦合程度對材料十分敏感。主梁上碳纖維替代玻璃纖維，并引入彎扭耦合設計將會使葉片在整體性能有較大提高。
    參考文獻
[1] Cheng-Huat Ong. Composite wind turbine blades[D].PhD Disser-tation,Stanford university,2000.
[2] C.H.Hong and I. Chopra. Aeroelastic stability analysis of a com-posite blade[J]．Journal of the American Helicopter Society,1985,30(3):57-67．
[3] C.H.Hong and I. Chopra. Aeroelastic stability analysis of a com-posite bearingless rotor blade[J]．Journal of the American Helicop-ter Society,1986,31(4):29-35．
[4] E. C. Smith，I. Chopra. Formulation and Evaluation of an Analyti-cal Model for Composite Box-Beams[J].AIAA-90-0962-CP，1990.
[5] Ramesh Chandra，Alan D. Stemple，Inderjit Chopra. Thin-walled Composite Beams Under Bending，Torsional，and Extensional Loads[J]．Journal of Aircraft,1990,27(7):619-626.
[6] D. W. Lobitz，P. S. Veers. Aeroelastic behavior of twist-coupled HAWT blades[J].AIAA-98-0029,1998 ASME Wind Energy Sym-posium held at 36th AIAA aerospace sciences meeting and exhibi-  tion,Reno,NV,Jan.1998.
[7] D. W. Lobitz，D. J. Laino. Load mitigation with twist-coupled HAWT blades[J].AIAA-99-0033，Proceedings of the 1999 ASME Wing Energy Symposium，Reno,1999.
[8] 李軍向,薛忠民,王繼輝等.大型風輪葉片設計技術的現狀與發展趨勢[J].玻璃鋼/復合材料,2008,(1):48-52.
[9] Andrew T Lee，BE(Hons).Compliant blades for wind turbines[J].IPENZ Transation,1999,26(1):7-12.
[10] W. C. de Goeji，M. J. L.，van Tooren，A. Beukers. Implemen-tation of bending-torsion coupling in the design of a wind-turbine rotor blade[J].Applied Energy,1999,63:191-207.
[11] James Locke，Ulyses Valencia. Design Studies for Twist-Coupled Wind Turbine Blades[J].SAND,2004.
[12] D. W Lobitz，P.S. Veers and P. G. Migliore. Enhanced Perform-anced of HAWT’s Using Adaptive Blades[J].Proc. Wind Energy96，ASME Wing Energy Symposium，Houston,1996:41-45..
[13] 李順林,王興業主編.復合材料結構設計基礎[M].武漢：武漢工業大學出版社,1996.
[14] Ronald F. Gibson. Principles of Composite Material Mechanics[D].New York：McGraw-Hill,Inc,1994.